rev-top
HOWITWORKSH
tr1

Click here to view video

Pick Up

The new and improved pick up function can be adjusted without leaving the cab for varying bale sizes and uses twin assister supports to ensure a smooth movement capable of handling most bale sizes. Large tines grip the bales securely ready for transition onto the turntable. This works in conjunction with the guide bar so the process of aligning the bale for pick up is incredibly simple. The guide bar will automatically retract when “Road Mode” is selected for safety. There are also two spare tines
mounted on the chassis as standard.

tr3

Simply align the bale with the right hand wheel of the tractor and drive forwards until it is held in position with the guide bar and pick up frame.

Activate the auto pick up function on the advanced joystick control and large double tines penetrate the bale holding it securely on the pick up frame, lifting it clear of the ground without stopping or slowing your forward movement.

The bale is placed on the turntable pushing any previously collected bales to the far side, the tines then retract and the pick up returns to its home position ready for the next bale all in one smooth automatic movement.

Turntable
The large capacity turntable can handle all sizes of bales listed without any modification or adjustment. It is capable of stacking the bales passed on from the pick up by either raising in the forward position or rotating through 90 degrees so the stack can be tied together for safer stacking as the double row of strengthened tines secure the bales in place. This tie-in function can be performed with one flick of the advanced joystick control in the cab at any point in the load.

Once vertical, the turntable will then push the bales rearwards to locate them as the start of the stack or guiding any previously placed bales towards the rear to form the remainder of the stack.

The turntable will also stay in place when the “Full Load” function is activated and act as a clamp to secure the stack when raising at the stack site.

tr4
tr5

Side Clamps
These have been designed with the maximum possible strength but still retaining a narrow profile for overall machine width and weight savings. Depending on the size of bale being stacked, the side clamps can be used as a guide for the bales travelling along the bed when creating a stack or left open. When the “Full Load” function is activated the clamps will automatically grip the bales so you can proceed to the stack site without having to worry about adjusting any settings ready for tipping.

tr7

Chassis
The ultra strong chassis is a proven design and is now built on a production line for maximum strength and reliability.
Conforming to ISO 9000 standards for quality and manufacturing.

tr6

Rear Pads
As with the Side Clamps, maximum strength is the priority. When a full load is sensed the clamps will automatically grip the bales with massive force thanks to the revolutionary hydraulic system ready for tipping.

Both the Rear Pads and the Side Clamps can be lowered for storage or transport of the trailer.

tr8

Tipping and Collection
One of the unique features of the Big Bale Transtacker is the ability to not only vertically stack the bales it has collected but also pick them up again for transport to another location.

The bales are held securely using the Turntable, Side Clamps and Rear Pads and reversed toward the existing stack. The trailer can be tipped whilst moving.

When the tipped stack is in position, activate the joystick control which then starts to open all clamps.

Drive away, one simple and efficient procedure. Picking up the stack is just a matter of reversing this process.

To download the complete Transtacker brochure
Click here.

Big-Bale-Logo
flag
[Home] [How It Works] [Sales & Hire] [Accessories] [Contact]